Replacement Filter Cartridges for Summer Waves Above Ground Pool Pumps — Keep your water clear, your pump happy, and your swim season hassle-free. This guide covers the most-searched Summer Waves cartridge SKUs (P57100202, P57000104, P57100102) and how they compare, plus tips on third-party equivalents and when to replace each type. We’ll note which cartridges fit the compact Type D canisters used on 350–600 GPH pumps (RX-600/SFS-600 class), and which fit the taller Type A/C canisters found on larger systems. You’ll also see typical dimensions, media materials, expected lifespan, and practical maintenance cues so you can choose confidently and avoid cloudy water or pump strain. For quick scanning, each section highlights filtration suitability, key features, compatible alternatives, and simple replacement timing rules. If you’re unsure which you own, measure the cartridge: Type D is short and squat (about 3.7–3.8″ tall by ~4.1–4.3″ OD); Type A/C is much taller (about 8″ tall by ~4.13″ OD). Replace more often during heavy use, and rinse after each swim day to stretch life. Smart swapping keeps circulation strong, sanitizer effective, and summer swimming effortless.
Summer Waves P57100202 Swimming Pool Pump Filter Cartridges (Type A/C)
The P57100202 is Summer Waves’ taller Type A/C cartridge, used on larger canisters and higher-flow pumps. Choose this if your current element measures roughly 8″ tall and ~4.13″ in diameter. Expect sturdy pleated media for fine debris capture and simple hose-down cleaning between changes. Typical replacement cadence is about every 2 weeks in peak season (sooner with heavy debris).
- Filtration capacity: Suited to larger Summer Waves canisters using Type A/C elements; helps maintain clear water at higher pump throughputs.
- Life span: ~2 weeks in-season (clean & rotate spares to extend).
- Features: Dense pleats for fine capture; easy hose-rinse maintenance.
- Third-party options: Compatible A/C-size cartridges from various brands (verify 8″ x ~4.13″).
- When to replace: Every ~2 weeks or when pleats stay gray after rinsing, flow drops, or pressure rises.
Technical Specifications
- Material: Pleated polyester/fiber media (often described as heavy-duty “filter paper”).
- Dimensions: Approx. 8″ height × 4.13″ outer diameter (A/C size).
Summer Waves P57000104 – Upgraded Type D Filters
P57000104 refers to Summer Waves’ upgraded Type D cartridge packs. These short cartridges fit compact canisters on small above-ground systems (e.g., RX-600/SFS-600 family). “Upgraded” packs typically emphasize sturdier end caps and tighter pleat spacing for better dirt holding and rinse-ability versus budget variants.
- Filtration capacity: Ideal for small canisters and pumps in the ~350–600 GPH class; good daily clarity when cleaned frequently.
- Life span: ~1–2 weeks in peak season (rotate two cartridges and rinse after use).
- Features: Dense pleats, durable end rings, quick hose-down cleaning.
- Third-party options: Poolpure, Cryspool, AquaHouse “Type D” compatible cartridges.
- When to replace: When water stays hazy after proper chemistry, the pleats remain stained post-rinse, or flow noticeably slows.
Technical Specifications
- Material: Pleated polyester/fiber media with plastic end caps.
- Dimensions: ~3.7–3.8″ height × ~4.1–4.3″ outer diameter; inner core ~2.0–2.1″.
Summer Waves P57100102 – Budget Type D Filters
P57100102 is the common budget Type D 2-pack for compact Summer Waves pumps. It delivers solid everyday filtration at the lowest cost, best for light debris loads and frequent rinsing. Use with RX-600/SFS-600-style canisters and similar small systems.
- Filtration capacity: Daily clarity for small canisters on modest flow pumps; clean often for best results.
- Life span: ~1 week in heavy use; up to ~2 weeks in light use (if rinsed after each swim day).
- Features: Value pricing; compatible size for most Type D housings; easy swap-in.
- Third-party options: POOLPURE, Cryspool, and similar Type D compatibles noted for 3.75″ × 4.13″ fit.
- When to replace: When pleats fray, end caps loosen, or flow falls even after rinsing.
Technical Specifications
- Material: Pleated polyester/fiber media.
- Dimensions: Typical Type D ~3.75″ height × 4.13″ OD (± tolerance); ID ~2.0–2.1″.
Cartridges for Other Summer Waves Models
Beyond the SKUs above, match by type and size. Compact canisters generally use Type D (≈3.7–3.8″ tall × ~4.1–4.3″ OD). Larger canisters use Type A/C (≈8″ tall × 4.13″ OD). Many compatible third-party options exist—verify dimensions and pump family (RX/SFS/RP/SFX). If your pump model is RX-600, SFS-600, RP-400/600, etc., you’re almost certainly on Type D; if using RX/SFX-1000/1500 or RP/SFS-700/800/1000, you’re likely on Type A/C.
- Third-party catalogs: AquaHouse AH-PTD (Type D), POOLPURE Type D, others—check the 3.75″ × 4.13″ spec.
- Fit-check tip: Measure height and OD; confirm inner core (~2″) for Type D.
- Replacement rule of thumb: Rinse after each swim day; replace every 1–2 weeks in season or sooner if flow/clarity drops.
Technical Specifications
- Type D (most small canisters): ~3.7–3.8″ H × ~4.1–4.3″ OD; ID ~2.0–2.1″. Pleated polyester/fiber.
- Type A/C (larger canisters): ~8″ H × 4.13″ OD; pleated polyester/fiber.
Conclusion: For small Summer Waves systems, stick with Type D (P57000104 “upgraded” for durability; P57100102 “budget” for value). For larger canisters/pumps, choose the taller Type A/C P57100202. Confirm by measuring your old cartridge and cross-checking pump family (RX/SFS/RP/SFX). Rinse after each swim day and plan on swapping every 1–2 weeks in peak season, or sooner when flow and clarity decline. Using the right size—and replacing on time—protects your pump, keeps sanitizer working, and delivers that consistently sparkling, swim-ready pool all summer long.
For more Replacement Filter Cartridges and other Summerwaves Products, visit Summerwaves Store on Amazon and Summerwaves Website